10 Tips on How to Hang Almost Anything

I still remember when we lived in our first house – the first project we tackled was improving our closet.  I remember Hubby patiently showing me how to find a stud, drill a pilot hole and hang something properly from the wall.  It has proved to be as valuable as the typing lessons I took in high school.  A girl has got to know how to hang stuff on a wall!

Recently, I shared with you how I went about planning my gallery wall.  Today, I am sharing how to hang all different types of items to create a unique gallery wall, or any wall for that matter.

10 Tips on How To Hang Almost Anything

As you can see from the gallery walls I have created, I like to incorporate more than just framed art or canvases.

That requires some creativity in terms of how to hang things.

Gallery Wall Ideas from Finding Home Family Room, Dining Room, Guest Bedroom

So, here are my tips, tricks ideas – 10 of them – and how to hang everything fabulous on your walls.

 greenlinedotsonbottom copy 1. THE BASICS: HANGING A FRAMED PICTURE THE EASY WAY

How to Hang a Picture Correctly

Step 1: Position the picture on a wall and mark the top of the frame with a pencil (or chalk).  It helps to have an extra set of hands and step back to view if you are not using a template for placement.

Step 2: Using a tape measure, pull the wire on the frame upwards as far as it goes.  This will replicate the position when it is hanging on the wall.  Record the measurement to the top of the frame.

Step 3: Measure down from the where you left a pencil mark for the top of the frame the distance you just recorded.  Make sure that the hook opening (where the wire will sit) is at that mark – not the nail.  In this case, I used two picture hooks because it was a large frame.  This allows the picture to balance the weight and keep a straight position – avoiding the need to straighten it each time you go by!

Step 4: Erase all pencil (or chalk) marks.

Step 5: Hook your wire onto your hook or hooks, check that it is level – and you are done!

greenlinedotsonbottom copy2. USING A DISC HANGER

Disc hangers are my go to for many items.  They were originally designed for plates, but I have been attaching them to assortment of things for years – most specifically my trays in my dining room.

They can be used on plates, trays, wood, any quirky item – you just need a clean smooth surface.  There are different sizes for different weights.


Start with a clean surface, then wet the back of the disc, wait about a minute (instructions are on the back).  Apply to your item, paying attention to where the hook is going to be – make sure it is not sticking out the top.  Here is the hard part – you really do need to wait over night for it to dry, or at least several hours(not my strong suit) for it to have a good hold.  Then, just use the same principals as hanging a framed picture and you are done.  The best part, if you change your mind and no longer want to hang it on the wall – you simply wet it again to remove it.

The disc hangers can be found at craft stores or here:

Invisible English Disc Adhesive Large Plate Hanger Set (4 – 4 Inch Hangers)

greenlinedotsonbottom copy


When I have something heavy to hang – my go to is always a pair of French cleats.  These can be found big box hardware stores where you find picture hanging hardware or here:

OOK 55310 Hangman 60-Pound 7-Piece French Cleat Picture Hanger with Wall Dog Mounting Screws

Each set has two pieces – one for the wall, one for the item – follow the diagrams on the package!  I used these to hang my daughter’s headboard, heavier artwork – and in this case – the tray being used as shelf.  I wanted to be able to put whatever I wanted in and on top of the tray – and not have to worry about weight and stability – especially since there is a glass table below it.

The cleats can be a bit pricey – but I think worth the investment of the peace of mind of not worrying about your item falling to the ground.


Step 1 – Start on the wall and find at least one stud that lines up with where you want your item to be.  If you can find two – that is even better.  The stud almost never ends up centered on the item.  If it did, you could use one and call it a day.  But to make sure it is balanced – I use two making sure at least one screw is in a stud.  For this shelf, I hit two studs, but not centered on the item.  Do some math.  Figure out placement so that you maximize the studs and then distribute the two out over the width of the item.

Step 2: Since the cleat is wider than the stud – you will need to use wall anchors for the second screw.  Drill pilot holes for the screw and wall anchor, insert your anchor and use a drill to attach the screws.  There is a level included in the cleat that guides you to keep it level (the wall anchors are usually included with the cleat).  There is also a level in the part that goes on the wall to ensure that you hang each one straight.

Step 3: Use a level between the two cleats to make sure that they are level with each other.  Repeat step 2 for the second cleat.

Step 4: Measure the distance between your cleats on the wall, and work in replica to attach the other half to your item with the included screws (drill a pilot hole first so you do not split the wood).


Step 5: Hang your item on the cleats.  The best part is you have some flexibility of moving the item left to right without compromising the ability to hold too much.

greenlinedotsonbottom copy4.  3M COMMAND ADHESIVE, HOOKS AND PICTURE HANGERS

There are a ton of3M Command products out there not that not only allow you hang things without putting a whole in the wall, but provide solutions for items that are challenging to hang.  This is one of my favorite and most sought out solutions.

In this case, I used single, two sided ones to attach a wood paddle to my wall in the kitchen.  But there are ones that you attach to the wall and to the item – and then they attach with Velcro.  The Velcro also allows you to reposition things slightly as well.  I have used this on trays, small canvases and small frames.  They are definitely suited for lighter items.


greenlinedotsonbottom copy5. RIBBON

Sometimes, it can just be simple.  For this tray – since it had pierced sides, I threaded a ribbon in the same color, for camouflage and hung it on a nail – done!


greenlinedotsonbottom copy6.  HOOKS

Sometimes the hanging method can actually be part of the display.  In these there cases I had heavy items that needed something substantial.  I decided to embrace that and use a vintage decorative hook to hang them.  In the case of the key and the sign, I spaced things so that they one screw was in a stud.  For the keys, I used wall anchors to screw into.


I also love this idea for creating your own hook that I found at Lookie What I Did.

greenlinedotsonbottom copy7.  PICTURE WIRE

Sometimes, something that is not a picture frame, can be treated like one.  For this tray, I didn’t want to screw anything larger than an eyehole screw into it – one because I was afraid it would come through, two because I worried about it splitting the wood and three because I want to be able to change my mind and take it out later if I choose to.

3M Command would not be strong enough and I wasn’t positive the disc hanger would hold since it would be filled with items.

For this case, I chose to add the eyehole screws and run picture wire between.  Using the same principals of step 1, I easily hung this in the collection.


 greenlinedotsonbottom copy


Sometimes it is as easy as a simple nail.  Position, the item – tap in a nail, hang it – done!

Hanging art with a nail

This is a card holder display – I just tacked a nail in each corner.

 greenlinedotsonbottom copy


Sometimes items come already set to be hung with flush mount holes or attached hooks and you have to work with the placement as it is given to you.

Kristin of The Hunted Interior has a great tip on how to figure out the placement of your screws.

hunted interior

greenlinedotsonbottom copy 10. A Shelf

Sometimes I prefer the look and flexibility of layering art, pictures and unique items on a shelf as opposed to hanging them on the wall.

Using a Shelf in a Gallery Wall

You can easily change things out with the seasons or your mood.

greenlinedotsonbottom copy

As with all of these steps, try to make it work on at least one stud and use wall anchors where there is not a stud that are appropriate to the weight of the object you are hanging – and please always try to error  on the side of caution if something could fall on someone!

So there you have it, 10 tips for hanging just about anything.

Do have any other tip or tricks that you have found work?


postsignature.pngP.S. If you would like some more gallery wall inspiration, you can visit my gallery wall Pinterest board or for inspiration in all categories, you can follow me on Pinterest:

Disclosure: This post contains affiliate links.

Follow Finding Home on Pinterest

About Finding Home

Welcome to Finding Home Farms where we share our favorite DIY and decorating ideas and inspiration. We believe your home should be a reflection of you and your family. Our blog is the story of our journey - and what we find along the way. Thanks for joining us!

Leave Us A Comment

62 thoughts on “10 Tips on How to Hang Almost Anything”


  1. Love your site and I just subscribed. I have a frame that you can see from both sides, don’t know what it is called, and I don’t know how to hang it. I have a lovely note from my son on one side of a piece of paper and on the other side a note from my brand new daughter-in-law and pictures from the wedding. How would I hang it or display it? Thank you for your help.

    1. Patty,
      If I can suggest, if the frame is not much bigger than letter size, use an easel. It allows the viewer (or yourself) to turn it over and read the back and puts it in contact with you. You are holding it without any distance between you and the letter. You can also place it or move it easily for better viewing.

  2. You link to “Lookie what I did” is missing the “www.” so it isn’t functioning. I love gallery walls too and use a bunch of the same tips. Will have to now consider ribbon, cleats and plate holders. Thanks! 🙂

  3. Thanks for all the great tips, Laura. I had to giggle when I got to the bottom and you suggested using floating shelves. Those are the things I have the MOST trouble hanging! 🙂

  4. LOVE your post! I have never even heard of french cleats before….we just have soccer cleats in Kentucky. 🙂 (sorry….I just couldn’t resist)!

    Have a great day rock star!

  5. Sign…. If I have something heavy I just don’t hang it up:( I have an amazing shelf from pottery barn for on top of my bed but it is heavy so it sits on the floor. I think I need you to come over.

  6. Do you have any ideas on how to hand an item outside on vinyl siding? I have a fairly lightweight metal scupture (about 5 lbs.) that I want to hang by front door, but can’t figure out what will work on siding without putting a hole in it.

  7. Just an fyi – I found special vinyl siding hooks on Amazon.. Haven’t tried them but it sounds promising.

  8. I’ve just purchased some Moroccan tribal rugs and am considering hanging one on the wall. What would be the best way to do that? It’s 4×5, a wool flat-weave.

  9. Very interesting. I’ve made some slate wall hangings . Only problem is I don’t know how I should hang them! I don’t really want to drill holes through them and attach cord as I feel it would ruin the front of them. I’m afraid to glue on hook openings in case they’re not strong enough and fall off. Would the discs work, do you think? Any suggestions?

  10. Thanks for your advice Laura. I think you’re right though I’m going to try those frameless mirror wall mounts first to see how it looks .Thanks again, Lucy

  11. I would love some help. I am planning to hang about 50 clip frames on a wall in my family room in which I will display pressed herbs. How can I hang these (10 rows vertically and 5 rows horizontally) so that they aren’t always tilted? There is a door on this wall that will cause them to move when slammed and I am afraid that I will spend the rest of my life looking at them to see if they are hanging straight? Any suggestions?

  12. How about when the item you want to hang doesn’t have hooks or anything to mount it with?
    I found 5 adorable ceramic frames at a garage sale and bought them for $10 total. But none of them have anything to be hung with! I bought these little sawtooth hangers with nails from The Home Depot, but turns out I can’t nail them into the ceramic frame because they won’t go in! Some of the frames have a velcro backing, which is even worse. Help! I’ve had them since August. 🙁

    You can see the frames here: http://instagram.com/p/dcaG76pTyt/

  13. I’m never coming back to this site. The”subscribe” link is in the middle of the page and no way to remove it, I’m on a phone. It’s harassing and distracting. It’s horrible web designing.

  14. I would like to add hooks to my ceramics figurine collection to create ornaments can I just use a hot glue gun and string. Please help by providing your expertise to solving my dilemma. I am not good with drills so looking for an easy method. Thankslb tylene

    1. As far as hanging things from hooks, I would not hang anything breakable with hot glue. I would seek out help from someone who is handy that could help you drill appropriately. Good luck!

  15. What I want to know is how to hang a LARGE brass plate that is 39 inches across and very heavy? I inherited this brass plate that my aunt had made for herself when she was stationed in Pakistan while employed by the Foreign Service/American Embassy. I don’t know what else to call it but a plate and really don’t want to ruin its beauty by drilling holes in it. She used it as a coffee table by placing it on top of a wooden tripod of sorts. I want to hang it on the wall, but again don’t want to drill holes in it. Any thoughts anyone?

  16. Hi! My son made me a mug rack out of a pallet. The only wall in my kitchen it will fit on is an exterior wall of a built in cabinet. Is this a bad idea? I have no idea how to hang this beauty! Do I need to put it in another room with a stud or two? I saw you mentioned wall anchors, but I have no idea what they are! Can you help me, please??

    1. I must admit, I do not fully understand what you are describing in terms of the type of wall you have. I would ask help from someone who can look at it or seek out a handyman. Thanks so much for stopping by.

  17. Hi, I have a variety of spears and boomerangs to hang on the wall but have no idea how to hang them, any idea?

    Cheers Sue

    1. I would think the command “velcro” strips would work well for those. Just make sure to get the right weight.

  18. Ribbon! Of course! Thank you. I want to hang ornate metal frames that were meant for tabletop. Since the designs have holes, ribbon is probably the way to go. Shelf may also work.

  19. Hi i have a medium sized boomerang that i would like to put on the wall. I thought putting two nails on the wall underneath it for it to rest on would be ideal….however it doesn’t stay on!
    I do not really want to stick it to the wall as i have just decorated it!

  20. Love this and I had no idea those plate hangers existed. I am going to use that idea but without the large circle area to hang some small painted wood panels I have. They are really light so I am going to use strips of fabric remnants (of which I have a ton of) to attach to the loop and then glue it all to the back of my thin painted wood panel. 🙂

  21. A fantastic looking mirror but not designed well for hanging.
    I purchased for the office a very large sunburst style metallic mirror that has long metal arms all around the centre mirror with lots of small mirrors on each of the arms. It had one little keyhole style slot on the back for hanging and had massive problems trying to hang it. We hired a tradesperson to put it up and he just shook his head and said that any screw that would fit into the small keyhole slot on the back of the mirror would not take the weight and we should take it back.
    Any ideas on how we can hang it would be appreciate.

  22. I want to hang my wind chimes on my porch. Usually I would screw hook in the wood. Unfortunately the porch is all metal. I’ve searched and asked but nothing. I hope you have some suggestions.

  23. Didn’t know about picture cleats until now. I really could have used these in the past. Thank you for the article!